Worksaver LRHD-6 Dokumentacja Pobierz pdf (Strona 28)

0000WS65:99900663: 6-219921030

6-4. CRANE ELECTRICAL

Inspect the winch motor and control box for

secure electrical contacts and the presence of

moisture. Loose contacts should be tightened

and moisture should be removed to help

eliminate corrosion.

Make certain that good contact is maintained at

the chassis ground wire connection. If severely

rusted or corroded, disassemble, clean and

reassemble.

Replace any severely crimped, broken or

frayed electrical wires.

6-5. VEHICLE ELECTRICAL

The vehicle’s battery must be maintained and

fully charged in order to provide maximum

efficiency. A program of regular inspection and

maintenance of the battery will help to assure a

reliable power source for the crane’s electrical

requirements. Following is a battery

maintenance checklist:

ELECTROLYTE LEVEL:

Keep the battery filled to its recommended level.

If low, fill with distilled water to its recommended

level.

BATTERY:

Clean all corrosion from the terminals and apply

a light coating of petroleum jelly to the terminals

when re-connecting.

Keep the exterior of the battery clean.

CABLE CONNECTIONS:

Remove all corrosion, sand the inside of clamps

to provide maximum electrical contact and firmly

tighten without damaging the battery posts.

ALTERNATOR:

Check for proper operation and repair or replace

if deficient.

ALTERNATOR BELT:

Check for tightness per vehicle specification

and adjust if out of specification. Also, check for

cracking and replace if found to be excessively

cracked.

Extremely cold conditions put extra strain on the

vehicle’s electrical system. Battery/electrical

maintenance is extremely important when

temperatures fall below 0°F.

Consult your vehicle owner’s manual for

specific information concerning your vehicle and

its recommended maintenance procedures.

6-6. CLEANLINESS

Keep the crane clean, and the decals legible to

the operator, especially the capacity placard

and warning decals. Cleanliness will make

inspection and maintenance easier. Also, the

application of wax to the crane will help protect

and prolong the life of the unit.

1 2 ... 23 24 25 26 27 28 29 30 31 32

Komentarze do niniejszej Instrukcji

Brak uwag

Worksaver LRHD-6 Dokumentacja Strona 28

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie Worksaver LRHD-6